CT
-
1,180 meters of fence on campus facing Gap-Chun River will be gone by June 2010.
KAIST and the City of Daejeon have taken on a project to remove a stretch of fence on campus that faces Gap-Chun River, making the campus accessible to all citizens and visitors. The work will last for three months beginning on April 5th and throughout June 2010. Gradually, KAIST plans to remove the entire fence surrounding the campus within a few years.
The city government has encouraged government and public organizations in Daejeon to open up their public space to citizens and visitors as part of its initiatives to reach out to local communities. As of December 2008, seven public organizations have completed to rid of their boundary markers, and eight more organizations will make their gardens and campus available to the public by the end of this year.
All the expenses related to the removal of the fence will be borne by the city government. At the place where the fence is knocked down will become a park so that neighbors and visitors can come and rest.
A school official said, “This is an important campaign for us because it promotes more exchanges between the university and local community. Our campus has rich green foliage, and visitors will surely enjoy it. By opening up our campus to the public, we hope to return to the society what we have received as a public institution and create a forum where art, science, and technology meet together.”
In addition to the removal of the fence, KAIST and the city government will install flowerbeds, health facilities, and walking trails for the citizens.
2010.04.26 View 9132 -
"The 2010 Artificial Intelligence Robot War Competition" begins to receive applications
[Event Notice]
“The 2010 Artificial Intelligence Robot War Competition” begins to receive applications
A good opportunity to gauge the intelligence of your robots
“The 2010 Artificial Intelligence (AI) Robot War Competition” will be held in October 2010, and the Competition has been receiving applications from contestants since April 1st. The deadline for the application will be May 31st, 2010.
Qualified contestants must be a minimum of two, but less than six, team members, and they will compete in one of the two fields: System on Chip (SoC) Taekwon Robot and Humanoid Robot (HURO). Winners will be decided based on the intelligence capabilities presented by a robot’s platform that mimics key functions of the human brain.
SoC Taekwon Robot will compete against one another by using a camera installed on its head to recognize visual images, locations, distances, and gestures of the other competing robot.
HURO competition is a new entry begun this year, and winners will be determined in accordance with the robot’s ability to perform given missions and fights. Missions are to go through a track installed with obstacles, recognize colors and shapes of barriers, and knock down barriers to earn scores. Fighting will be performed in the form of a Korean martial art, Tae-kwon-do.
The Korean government has nominated Robotics as one of the key growth engines to develop IT industry and Korean economy. Robotics converge many of different engineering fields, such as machinery, materials, components, and embedded software. In particular, the SoC is an essential technology for Korea to continuously take lead in the semi-conductor industry in the world, which is an important element for robotics.
SoC stands for System on Chip, an integrated chip that assembles various chips and components to be fabricated together on a single chip, instead of building them on a circuit board. The SoC technology has advantages of higher performance, smaller space requirements, lower memory requirements, higher system reliability, and lower consumer costs.
An artificial intelligence SoC robot is autonomous because it can adapt itself to changes in various environments and reach a given goal without constantly receiving external orders.
For details of the event, please refer to the website of www.socrobotwar.org.
2010.04.06 View 11970 -
Interesting research results were published on the use of Twitter.
The number of “followers” on your Twitter account does not necessarily mean that “Your opinions matter much” to other people.
A KAIST graduate researcher, Mi-Young Cha, joined an interesting project that studies the influence of a popular social media, Twitter. Most of Twitter users today consider the number of followers as a measurement of their influence on the social sphere. According to the research paper, however, this connection does not seem to standing together. For details, please click the link below for an article published by the New York Times.
Dr. Cha received all of her post secondary education degrees in Computer Science, including her Ph.D. in 2008, from KAIST. Since 2008 till now, she has been a post doctoral researcher at Max Planck Institute for Software Systems (MPI-SWS) based in Germany.
[New York Times Article, March 19, 2010]
http://www.nytimes.com/external/readwriteweb/2010/03/19/19readwriteweb-the-million-follower-fallacy-audience-size-d-3203.html
2010.04.05 View 12210
-
New drug targeting method for microbial pathogens developed using in silico cell
A ripple effect is expected on the new antibacterial discovery using “in silico” cells
Featured as a journal cover paper of Molecular BioSystems
A research team of Distinguished Professor Sang Yup Lee at KAIST recently constructed an in silico cell of a microbial pathogen that is resistant to antibiotics and developed a new drug targeting method that could effectively disrupt the pathogen"s growth using the in silico cell.
Hyun Uk Kim, a graduate research assistant at the Department of Chemical and Biomolecular Engineering, KAIST, conducted this study as a part of his thesis research, and the study was featured as a journal cover paper in the February issue of Molecular BioSystems this year, published by The Royal Society of Chemistry based in Europe.
It was relatively easy to treat infectious microbes using antibiotics in the past. However, the overdose of antibiotics has caused pathogens to increase their resistance to various antibiotics, and it has become more difficult to cure infectious diseases these days.
A representative microbial pathogen is Acinetobacter baumannaii. Originally isolated from soils and water, this microorganism did not have resistance to antibiotics, and hence it was easy to eradicate them if infected. However, within a decade, this miroorganism has transformed into a dreadful super-bacterium resistant to antibiotics and caused many casualties among the U.S. and French soldiers who were injured from the recent Iraqi war and infected with Acinetobacter baumannaii.
Professor Lee’s group constructed an in silico cell of this A. baumannii by computationally collecting, integrating, and analyzing the biological information of the bacterium, scattered over various databases and literatures, in order to study this organism"s genomic features and system-wide metabolic characteristics. Furthermore, they employed this in silico cell for integrative approaches, including several network analysis and analysis of essential reactions and metabolites, to predict drug targets that effectively disrupt the pathogen"s growth. Final drug targets are the ones that selectively kill pathogens without harming human body.
Here, essential reactions refer to enzymatic reactions required for normal metabolic functioning in organisms, while essential metabolites indicate chemical compounds required in the metabolism for proper functioning, and their removal brings about the effect of simultaneously disrupting their associated enzymes that interact with them.
This study attempted to predict highly reliable drug targets by systematically scanning biological components, including metabolic genes, enzymatic reactions, that constitute an in silico cell in a short period of time.
This research achievement is highly regarded as it, for the first time, systematically scanned essential metabolites for the effective drug targets using the concept of systems biology, and paved the way for a new antibacterial discovery. This study is also expected to contribute to elucidating the infectious mechanism caused by pathogens.
"Although tons of genomic information is poured in at this moment, application research that efficiently converts this preliminary information into actually useful information is still lagged behind. In this regard, this study is meaningful in that medically useful information is generated from the genomic information of Acinetobacter baumannii," says Professor Lee. "In particular, development of this organism"s in silico cell allows generation of new knowledge regarding essential genes and enzymatic reactions under specific conditions," he added.
This study was supported by the Korean Systems Biology Project of the Ministry of Education, Science and Technology, and the patent for the development of in silico cells of microbial pathogens and drug targeting methods has been filed.
[Picture 1 Cells in silico]
[Picture 2 A process of generating drug targets without harming human body while effectively disrupting the growth of a pathogen, after predicting metabolites from in silico cells]
2010.04.05 View 14627
-
New Text Book on Chemistry Published by KAIST Professor and Student
A chemistry textbook written in English and Korean will aid Korean students to learn General Chemistry in a global academic setting.
Korean students majoring in chemistry and looking for an opportunity to study abroad will have a new, handy textbook that presents them with a practical introduction to an English speaking lecture on general chemistry.
Aiming for advanced Korean high school and college/university students, the inter-language textbook is written by two incumbent professors teaching chemistry at a university in Korea and the US. The book will help Korean students prepare for a classroom where various topics of general chemistry are presented and discussed in English. Clear, collated sections of English and Korean text provide the student with sufficient explanation of the rudimentary topics and concepts.
Composed of 15 chapters on the core subjects of General Chemistry, i.e., Stoichiometry and Chemical Reactions, Thermochemistry, Atomic Structure, and Bonding, the textbook includes essential English vocabulary and usage sections for each chapter; it also contains a pre-reading study guide on the subject that prepares the student for listening to a lecture. This section includes view-graph type slides, audio files, and follow-up questions the student can use to prepare for an English-speaking course. The various accompanying audio files are prepared to expose the student to English scientific dialogue and serve as examples for instruction at Korean secondary and tertiary schools.
The book was coauthored by Korean and American scientists: A father and son, who have taught chemistry at an American and Korean university, wrote the book. Professor Melvyn R. Churchill at the State University of New York at Buffalo and Professor David G. Churchill at KAIST prepared all of the technical English text which was adapted from General Chemistry course lecture notes; the text was further shaped by original perspectives arising from many student interactions and questions.
This English text was translated into Korean by Professor Kwanhee Lee from the Department of Life and Food Science at Handong Global University, who coauthored a previous preparatory book for Korean students in a different subject. He also supplied an important introductory section which serves as a general guide to the classroom student. Kibong Kim, a doctoral student in the Department of Chemistry at KAIST, helped in preparing the book as well.
“This has been definitely a collaborative undertaking with an international academic crew and it underscores that the Korean internationalization in science is mainstream. Professors and a Korean student created a new book for Korean consumption and benefit,” Professor David G. Churchill says.
----------------------------------------------------------------------------------------
Bibliography: “How to Prepare for General Chemistry Taught in English” by David George Churchill, Melvyn Rowen Churchill, Kwanhee Lee & Kibong Kim, Darakwon Publishing, Paju, Republic of Korea, 2010, 400 pp, ISBN 978-89-5995-730-9 (1 Audio CD included)
2010.04.02 View 13484
-
Prime Minister Lars Løkke Rasmussen of the Kingdom of Denmark visited KAIST on March 11, 2010.
Prime Minister Lars Løkke Rasmussen of the Kingdom of Denmark visited KAIST on March 11, 2010. HUBO, a humanoid robotdeveloped by KAIST, gave a warm welcome to the prime minister and his delegation.
Prime Minister Lars Løkke Rasmussen of Denmark visited Moon-Ji Campus of KAIST on March 11, 2010 and had a chance to meet a humanoid robot, HUBO. Since the first appearance in 2005, HUBO has been continuously developed by KAIST for further refinements.
HUBO welcomed the prime minister and offered him a flower bouquet. They also shook hands and exchanged small talks in Danish, which made the delegation pleasantly surprised.
The Danish delegation had a ride on Online Electric Vehicle (OLEV) and showed a great interest in the technology applied therein.
The prime minister said, “Denmark has a keen interest in green technology, and I was very impressed by OLEV. It is just amazing to see how fast KAIST has developed as an outstanding research university in the world during a short period of time.”
President Lee Myung-bak invited the Danish prime minister to discuss current international developments, including issues involving the Korean Peninsula, and ways to enhance bilateral cooperation in such areas as trade, investment, renewable energy and green growth.
2010.03.17 View 12156
-
Photonic crystals allow the fabrication of miniaturized spectrometers
By Courtesy of Nanowerk
Photonic crystals allow the fabrication of miniaturized spectrometers
(Nanowerk Spotlight) Spectrometers are used in materials analysis by measuring the absorption of light by a surface or chemical substance. These instruments measure properties of light over a specific portion of the electromagnetic spectrum. In conventional spectrometers, a diffraction grating splits the light source into several beams with different propagation directions according to the wavelength of the light. Thus, to achieve sufficient spatial separation for intensity measurements at a small slit, a long light path – i.e., a large instrument – is required.
However, for lab-on-a-chip or microTAS (total analysis system) applications, the spectrometer must be integrated into a sub-centimeter scale device to produce a stand-alone platform. To achieve this, researchers at the Korea Advanced Institute of Science and Technology (KAIST) propose a new paradigm in which the spectrometer is based on an array of photonic crystals with different bandgaps.
"Because photonic crystals refelct light of different wavelengths selectively depending on their bandgaps, we can generate reflected light spanning the entire wavelength range for analysis at different spatial positions using patterned photonic crystals," Seung-Man Yang, Director of the National Creative Research Initiative Center for Intergrated Optofluidic Systems and Professor of the Department of Chemical & Biomolecular Engineering at KAIST, tells Nanowerk. "Therefore, when the light source impinges on the patterned photonic crytals, we can construct the spectrum using the reflection intensity profile from the constituent photonic crystals."
Photonic crystals – also known as photonic band gap material – are similar to semiconductors, only that the electrons are replaced by photons (i.e. light). By creating periodic structures out of materials with contrast in their dielectric constants, it becomes possible to guide the flow of light through the photonic crystals in a way similar to how electrons are directed through doped regions of semiconductors. The photonic band gap (that forbids propagation of a certain frequency range of light) gives rise to distinct optical phenomena and enables one to control light with amazing facility and produce effects that are impossible with conventional optics.
To demonstrate this new concept based on patterned photonic crystals, Yang and his group used non-close-packed colloidal crystals of silica particles dispersed in photocurable resin. Due to the repulsive interparticle potential, monodisperse silica particles spontaneously crystallize into non-close-packed face-centered cubic (fcc) structures at volume fractions above 0.1. Therefore, the particle volume fraction determines both the lattice constant and the bandgap position.
a) Optical image of an ETPTA film containing porous photonic crystal stripe patterns with 20 different bandgaps. b) Reflectance spectra from the 20 strips. c) Optical microscope image of the middle region with the parallel stripe pattern (denoted as white-dotted box in a). d) Cross-sectional SEM images of first, sixth, eleventh and seventeenth strips. The scale bars in a, c and d are 1 cm, 2mm and 2 µm, respectively. (reprinted with permission from Wiley-VCH Verlag)
Reporting their findings in a recent issue of Advanced Materials ("Integration of Colloidal Photonic Crystals toward Miniaturized Spectrometers"), the KAIST team has demonstrated the integration of colloidal photonic crystals with 20 different bandgaps into freestanding films (prepared by soft lithography), and their application as a spectrometer.
Yang explains that the team was able to precisely control the photonic bandgap by varying the particle size and volume fration.
"The prepared colloidal composite structures showed high physical rigidity and chemical resistivity" he says. "The composite structure is suitable for spectroscopic use due to the small full widths at half maximum (FWHMs) of the reflectance spectra, which mean that there is little overlap of the reflectance spectra of neighboring photonic crystal strips."
"On the other hand" says Yang, "porous photonic crystals showed large FWHMs and high reflectivities, which should prove useful in many practical photonic applications that require high optical performance and physical rigidity as well as simple and inexpensive preparation."
In addition to fabricating miniaturized spectrometers, which can for instance be integrated into small lab-on-a-chip devices, these integrated photonic crystals can be potentially used for tunable band reflection mirrors, optical switches, and tunable lasing cavities. Moreover, patterned photonic crystals with RGB colors are well-suited for use in reflection-mode microdisplay devices.
Yang points out that, although the spectrometric resolution can be reduced by employing the smaller bandgap interval and photonic bandwidth, there is a limitation. "Now, we are studying photonic crystals with continuous modulation of bandgap position. We expect that the photonic crystals can reduce the resolution to 0.01 nm."
By Michael Berger. Copyright 2010 Nanowerk
2010.03.17 View 13053
-
President Suh Hosted Press Conference with Seoul-based Correspondents, on March 9, 2010
President Suh Hosted Press Conference with Seoul-based Correspondents, on March 9, 2010
President Nam-Pyo Shu had a press conference with foreign correspondents based in Seoul, South Korea, on March 9, 2010 at Seoul Foreign Correspondents’ Club (SFCC).
Prior to the conference, the president and correspondents attended a ceremony for the completion of Online Electric Vehicles (OLEV) that carries passengers to look around the amusement park, Seoul Grand Park, in Gewacheon City. OLEV was developed and built by KAIST. Following President Suh’s opening speech, a questions and answers (Q&A) session between the president and reporters proceeded.
In his opening speech, President Suh said electric vehicles are an alternative to conventional automobiles with combustion engines, and in order to manufacture affordably priced electric vehicles on a large scale, their charging should be streamlined. In response, KAIST has come up with the online electric vehicle concept.
He added, without installing separate charging stations, OLEV receives electric power from the cables buried underground while driving, idling, or parking. Its connection to a power source is non-contact.
President Suh expressed his excitement for demonstrating OLEV at Seoul Grand Park that its system works as KAIST has designed and predicted. He showed his confidence that KAIST is indeed at the stage to implement OLEV in Seoul City soon and hoped to demonstrate it at the upcoming G-20 Summit to be held in November 2010 in Seoul City.
During the Q&A session, reporters cited the construction of OLEV at the amusement park and mainly asked about a possibility of its commercialization. Other topics, they also questioned about, were hurdles related to the development and commercialization of OLEV; level of cooperation received from industries and central/local governments; technological breakthroughs and accomplishments; future development plans for the commercialization; and reactions from the public and government.
Media outlets participated in the conference were Reuters, AFP, the International Herald Tribune, ABC News, Bloomberg News, Businessweek, Voice of America, Sankei Shimbun, and etc.
2010.03.16 View 9780
-
KAIST introduced environmentally friendly public transportation to Seoul Grand Park.
KAIST introduced environmentally friendly public transportation to Seoul Grand Park.
First step toward the commercialization of Online Electric Vehicle (OLEV)
An online electric vehicle (OLEV) developed by KAIST replaced a trackless combustion-engine train running inside Seoul Grand Park in Gwacheon City, South Korea. On March 9, 2010, Seoul City and KAIST celebrated the completion of OLEV that picks up electricity from power cables buried underground through a non-contact magnetic charging method, called electromagnetic induction. Electromagnetic induction is the process of inducing electric current in a coil with the help of a magnet.
The pickup unit installed underneath OLEV collects electricity from a roadway and distributes the power either to operate the vehicle or for battery storage. Whether running or stopped, OLEV constantly receives electric power through the underground cables. As a result, OLEV mitigates the burden of equipping electric automobiles with heavy, bulky batteries—OLEV’s battery size is one-fifth that of the batteries installed in electric vehicles currently on the market.
There is no need to establish massive charging stations or to set aside much time for recharging. If the underground power lines installed on road curbs, bus stops, parking lots, and intersections, the power system could support a substantial portion of public transportation: For example, KAIST estimates that by establishing 20% of the road infrastructure for a bus route in Seoul City, the city could offer its citizens the online electric buses.
The non-contact charging of vehicles while running, idling, or parking is an important and practical technology necessary for the development of commercialized electric vehicles. This technology solves many of the issues related to the current batteries of electric vehicles, including size, expense, and repair/maintenance. In addition, non-contact charging is safer because it prevents potential electrical hazards, such as electric shock, that result from direct contact with power sources. Furthermore, it is more convenient to drive vehicles without overhead wires directly connected to power lines, as is necessary for streetcars and trams.
The recharging strips are divided into several meters of segments in length, and vehicles receive the power each time they pass over one. In other words, a sensor is affixed within each segment. When a car with the pickup equipment drives over the segment, the sensor is turned on for the car to receive electricity. This means that when a car without the pickup equipment passes over the segment, it will not collect any electricity.
The power supply via on/off switch (sensors) relieves safety concerns about electromagnetic field (EMF). Pedestrians or cars without the pickup unit will not be exposed to EMF because the sensor embedded in the segments will not work, thus no electricity generated. In addition, even under the circumstance of EMF yield, the test results for OLEV are well below the 1998 the International Commission on Non-Ionizing Radiation Protection (ICNIRP) guideline, 62.5mG at 20khz. OLEV’s EMF test results range from 20mG (inside OLEV while running) to 50mG (around OLEV while parking).
When talking about a wireless energy transfer such as electromagnetic induction, the most critical issue is how to reserve an air gap of 12cm (in accordance with Korean law) between the surface of roads and the bottom of vehicles while having 60% power transmission efficiency or above. There was a similar research done in the US at University of Berkley—their research was considered unsuccessful because they obtained an air gap of 5-7cm with 60% maximum level of efficiency. Besides, their electromagnetic field (EMF) was quite high (2000A), and they were unable to bring down the high cost of installing power supply system. By contrast, for the first time in the world, KAIST has succeeded to obtain 12cm (and up to 17cm) of air gap with more than 70% efficiency level of power transmission. The EMF is also well below the international standard of 62.5mG. In a nutshell, KAIST has achieved a core technology in terms of capacity, efficiency, and EMF to develop electric vehicles for commercial use.
The city government of Seoul and KAIST signed a Memorandum of Understating (MOU) on the development of an online electric vehicle in August 2009. Against the backdrop of the public’s increased awareness of environmental pollution and the depletion of fossil fuels, the two organizations agreed to introduce eco-friendly vehicles to the city’s public transportation, beginning with the introduction of a trial version of OLEV to places like an amusement park, bus terminal, airport, shopping mall, and the like.
KAIST’s OLEV research team is made up of experts from a variety of fields, including electrical and electronics engineering, computer sciences, civil engineering, information technology, and mechanical engineering. OLEV’s success at Seoul Grand Park is a result of KAIST’s innovative initiatives on convergence research, and KAIST has submitted more than 120 applications for patents right in connection with the development of OLEV.
Online Electric Vehicle at Seoul Grand Park
In terms of power transmission efficiency, KAIST’s research team achieved a maximum pick-up capacity of 62kw/h, 74% with an air gap height of 13cm from a road to the bottom of a vehicle. Composed of one engine and three passenger cars, OLEV travels along a total length of 2.2km beltway. There are four sections of power supply infrastructure established on the route (Sections 1, 2, and 3: 122.5 meters long each, and Section 4: 5 meters long). The power supply cables were laid underground for a total of 372.5 meters, 16% of the total distance of the 2,200 meter route.
2010.03.12 View 12517
-
Future of Electric Automobile Glimpsed from KAIST
Etnews.co.kr. printed an interview with Professor Edward A. Lee, from the Department of Electrical Engineering and Computer Sciences, University of California in Berkeley, who visited KAIST to attend the 2010 International Workshop on Information Technology (IT) Convergence. During the workshop, Professor Lee had a chance to ride KAIST’s Online Electric Vehicle (OLEV), and etnews.co.kr. asked him about his impressions.
Article published on Friday, February 19, 2010
(For the Korean article, please click the link at http://www.etnews.co.kr/news/detail.html?id=201002190158)
The below is a translation from the Korean text.
-----------------------------------------
Reported by Hee-Bum Park (hbpark@etnews.co.kr)
"Future of Electric Automobile Glimpsed from KAIST"s Online Electric Vehicle Project," said Professor Lee.
Distinguished Professor Edward A. Lee, from the Department of Electrical Engineering and Computer Sciences, University of California in Berkeley, expressed his impressions after a ride on KAIST’s Online Electric Vehicle.
“KAIST’s Online Electric Vehicle (OLEV) really grabs my attention because the vehicle receives its needed electricity from a cable buried underground, not from batteries. Still, many challenges lie ahead for the electric vehicle to be commercialized, but I think, today, I saw the future of electric vehicles from the KAIST project,” explained Professor Lee.
Professor Lee came to Daejeon to attend the “2010 International Workshop on Information Technology (IT) Convergence,” which was held on February 19, 2010 at KAIST’s Information and Communication Convergence (ICC) Campus.
“I rode the bus and saw its instrument panel, which displays figures of electricity picked up from the ground. The bus presents the possibility of an electric car that can actually be built in the near future,” added Professor Lee.
Professor Lee, however, pointed out that a number of issues should be addressed beforehand to commercialize OLEV, such as public concerns about magnetic waves, the economic impact of laying power strips underground, and battery efficiency as an alternative to petroleum based fuel. Nonetheless, he said that given people’s increased awareness of the problems associated with CO2 emissions, OLEV’s development is timely.
“As far as I know, there has been no research in the US to develop an electric car that receives electricity from cables buried beneath the road. It is creative and ambitious for KAIST to try to find the technological breakthrough necessary for the development of electric cars,” Professor Lee stated.
Professor Lee further commented, “So far, batteries on electric cars are heavy and bulky, and they require frequent recharging. I think KAIST has provided a solution to address this issue.”
Graduating from Yale University and Massachusetts Institute of Technology (MIT), Professor Lee earned his doctoral degree in Electrical Engineering and Computer Sciences from UC Berkeley. He worked for Bell Telephone Laboratories in Holmdel, New Jersey.
2010.03.03 View 12498
-
KAIST offers a new course on three-dimensional movies.
Registration for the class ends on February 18, 2010.
The Graduate School of Culture Technology (GSCT) at KAIST created a special class entitled “Master Class for Three-Dimensional (3D) Film Production.” Applications for the class will be accepted by Thursday, February 18, 2010.
The latest 3D movie, AVATAR, has become very popular upon its release in late 2009: An overwhelming visual and sensory experience provided by a 3D technology gave viewers real life feelings about a virtual reality built in the movie. People can almost reach out and touch an explosion, components of machines, and aliens appeared on the screen.
“In response to growing interests in 3D movies, KAIST GSCT established a special session to teach students an overall process of 3D film production,” said Kwang-Yeon Won, Dean of GSTC. He also stressed that the 3D technology would serve as catalysts in developing the next generation of visual industry in the 21st century.
“We have actively engaged in the development of 3D core technology and application contents. This class will be the first of our initiatives to launch a series of educational programs on 3D technology.”
The class offers a complete road of 3D film production: an overview of stereography for 3D movies from planning, shooting, to post production. Many of film professionals (i.e., Director Yang-Hyun Choi and Shooting Director Byung-Il Kim), who are currently working in the field, will join the class so that students can have an opportunity to learn all ends of 3D film industry, both in terms of theoretical knowledge and practical work experience.
The class is open to undergraduate/graduate students and to the public. For details, please refer to the website of http://ct.kaist.ac.kr/stereoclass2010 or call at 02-380-3698 (Industry-University Research Collaboration Center at KAIST Graduate School of Culture Technology).
2010.02.17 View 10451
-
A Breakthrough for Cardiac Monitoring: Portable Smart Patch Makes It Possible for Real-time Observation of Heart Movement
Newly invented device makes the monitoring easier and convenient.
Professor Hoi-Jun Yoo of KAIST, Department of Electrical Engineering, said that his research team has invented a smart patch for cardiac monitoring, the first of its kind in the world. Adhesive and can be applied directly to chest in human body, the patch is embedded with a built-in high performance semiconductor integrated circuit (IC), called Healthcare IC, and with twenty five electrodes formed on the patch’s surface.
The 25-electrodes, with a capability of creating various configurations, can detect cardiac contractions and relaxations and collect electrocardiogram (ECG) signals. The Healthcare IC monitors ECG signals and sends the information to a portable data terminal like mobile phones, making it possible for a convenient, easy check up on cardiac observations.
The key technologies used for the patch are the Healthcare IC that measures cardiovascular impedance and ECG signals, and the electronic circuit board made of four layers of fabric, between which electrodes, wireless antenna, circuit board, and flexible battery are installed. With the P-FCB (Planar Fashionable Circuit Board) technology, the research team explained, electrodes and a circuit board are directly stacked into the fabric. Additionally, the Healthcare IC (size: 5mm x 5mm), which has components of electrode control unit, ECG and cardiovascular resistance detection unit, data compression unit, Static Random Access Memory (SRAM), and wireless transmitter receiver, is attached on the fabric. The Healthcare IC is operated by an ultra-low electrical power.
Like a medicated patch commonly used to relieve arthritis pains, the surface of smart patch is adhesive so that people can carry it around without much hassle. A finished product will be 15cm x 15 cm in size and 1mm high in thickness. The Healthcare IC can measure cardiovascular impedance variances with less than 0.81% distortion in 16 different configurations through differential current injectors and reconfigurable high sensitivity detection circuitry.
“The patch will be ideal for patients who suffer a chronic heart disease and need to receive a continuous care for their condition. Once commercialized, the patch will allow the patients to conduct a self-diagnosis at anytime and anywhere,” said Yan Long, a member of the research team.
There has been a continuously growing demand worldwide since 2000 for the development of technology that provides a suitable healthcare management to patients with a chronic heart disease (e.g., cardiovascular problems), but most of the technology developed today are only limited to monitoring electrical signals of heart activity. Cardiovascular monitors, commonly used at many of healthcare places nowadays, are too bulky to use and give uncomfortable feelings to patients when applied. Besides, the current monitors are connected to an electrical line for power supply, and they are unable to have a low power communication with an outdoor communication gadget, thus unavailable for wide use.
Professor Yoo gave his presentation on this new invention at an international conference, International Solid-State Circuits Conference, held on February 8-10 in San Francisco. The subject of his presentation was “A 3.9mW 25-electorde Reconfigurable Thoracic Impedance/ECG SoC with Body-Channel Transponder.”
(Picture 1) Structure of Smart Patch
(Picture 2) Smart patch when applied onto human body
(Picture 3) Data received from smart patch
(Picture 4) Healthcare IC
2010.02.17 View 13727